Loading...
Dremel 111 1/32" 0.8mm Engraving Cutters
Regular price
RM28.00
Unit price
Delivery and Shipping
Delivery and Shipping
We currently ship to Malaysia. International shipping is available by request only, please contact us for inquiry.
Standard shipping normally takes 3-5 days. Express shipping within Klang Valley is available for an additional charge, please contact us if you need it.
Returning an item
Returning an item
If you are not completely satisfied with your purchase, please contact our customer service team. Please note that not all items are returnable, check our return policy page for details.
Engraving Cutter. Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. One cutter included.
Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals
For wood, fiberglass, plastic & soft materials
Not for use with hardened materials
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
1/8" shank
User Tips
Secure objects to a stable surface while working.
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
If chattering occurs, increase speed.
BIT DIAMETER INCH: 1/32"
BIT DIAMETER MM: 0.8 mm
Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals
For wood, fiberglass, plastic & soft materials
Not for use with hardened materials
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
1/8" shank
User Tips
Secure objects to a stable surface while working.
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
If chattering occurs, increase speed.
BIT DIAMETER INCH: 1/32"
BIT DIAMETER MM: 0.8 mm
Payment & Security
Payment methods - iPay88
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.