Makita Combo 2 TW005GD201 Impact Wrench 12.7 mm (1/2") + DF001GZ Driver Drill 13 mm (1/2") [ Raya Promotion XGT Combo ]

TW005GD201 Impact Wrench 12.7 mm (1/2")

Features:

• Electronic 4 stage impact power selection for added versatility
• 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
• Trigger switch with full speed mode allows for less hand and finger fatigue
• Constant speed control maintains fastening torque by minimizing the rotation speed reduction caused by decreased battery capacity
• Style of socket retention: Pin detent
• Reverse Rotation Auto Stop Mode stops after the bolt/nut loosened enough
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life

Specification

• Fastening Capacities: Standard Bolt: M10 - M20 (3/8 - 3/4") | High Strength Bolt: M10 - M16 (3/8, 5/8") | Nut-Busting Torque 630 Nm (465 ft. lbs.) | 2,050 Nm (1,510 ft. lbs.) | Square Drive 12.7 mm (1/2") Pin Detent
• Impacts Per Minute (IPM): 0-4,000 | 0-3,400 | 0-2,600 | 0-1,800
• Max Fastening Torque: 350 Nm (260 ft. lbs.)
• No Load Speed (RPM): 0-3,200 | 0-2,600 | 0-1,800 | 0-1,000
• Dimensions (L x W x H): 144 x 86 x 248 mm (5-5/8 x 3-3/8 x 9-3/4")
• Net Weight: 1.9 - 2.2kg (4.2 - 4.9lbs.)
• Work Amount (approx.): 560 pcs with BL4025 x2 | Continuous tightening of M16 bolt

DF001GZ Driver Drill 13 mm (1/2")

Features

• Outstanding drilling speed; Delivers 20% or more higher speed than previous model
• Increased max speed (0-2,600 RPM) in High mode for faster drilling speed in light duty applications
• Variable 2-speed transmission (0-650 & 0-2,600 RPM) for a wide range of drilling and fastening applications
• Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
• Electronical clutch (41/21 settings in Low/High mode) allows for clutch setting in the torque range which cannot be covered
• XPT (e-Xtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh conditions

Specification

• Capacity Steel: 20 mm (13/16") | Wood (Auger-Bit): 50 mm (2") | Wood (Self-Feed Bit): 76 mm (3") | Wood (Hole Saw): 152 mm (6") | Siding Board: 220 mm (8-5/8")
• Chuck Capacity: 1.5 - 13 mm (1/16 - 1/2")
• Max Fastening Torque Hard: 140 Nm (1,240 in. lbs.) | Soft: 68 Nm (600 in. lbs.)
• Max Lock Torque: 125 Nm (1,100 in. lbs.)
• No Load Speed (RPM): High: 0 - 2,600 | Low: 0 - 650
• Dimensions (L x W x H): 181 x 86 x 275 mm (7-1/8" x 3-3/8" x 10-7/8")
• Net Weight: 2.7 - 3.0 kg (5.9 - 6.6 lbs.)
• Work Amount (approx.): 480 holes with BL4025 | Drilled 38 mm SPF with 7/8" auger bit (high speed)