WORCRAFT TS2000A TABLE SAW 10" | 2000W | 5000RPM
This WORCRAFT 255mm Table Saw with a powerful 2000W motor has been designed to cut timber and timber products.
The large work table with easy-to-install side tables provides greater stability when cutting larger workpieces.
Designed for multi-purpose applications such as ripping, cross, and miter cuts of timber, chipboard, and plywood. The saw can also be tilted up to 45° for accurate bevel cuts.
Equipped with recoverable thermal cut-off protector to avoid motor burn when over-load or jammed operation.
For safety, a push stick is included with its own holder where it is always within reaching distance.
Dust extraction from the rear of the saw will keep the work area clean.
Stand with anti-slip rubber feet provides full support and stability.
This WORCRAFT 255mm Table Saw with a powerful 2000W motor has been designed to cut timber and timber products.
The large work table with easy-to-install side tables provides greater stability when cutting larger workpieces.
Designed for multi-purpose applications such as ripping, cross, and miter cuts of timber, chipboard, and plywood. The saw can also be tilted up to 45° for accurate bevel cuts.
Equipped with recoverable thermal cut-off protector to avoid motor burn when over-load or jammed operation.
For safety, a push stick is included with its own holder where it is always within reaching distance.
Dust extraction from the rear of the saw will keep the work area clean.
Stand with anti-slip rubber feet provides full support and stability.
Equipped with recoverable thermal cut-off protector to avoid motor burn when over-load or jammed operation.
Dust extraction from the rear of the saw can be mounted with a vacuum cleaner, which will keep the work area clean.
Stand with anti-slip rubber feet provides full support and stability.
- Voltage/Frequency: 220~240V, 50/60Hz
- Rated power: 2000W
- IP20
- No Load speed: 5000min-1
- Work Hight: 829mm
- Table size: 640x486x28mm
- Left table size: 640x227x28mm
- Right table size: 640x227x28mm
- Blade size: 255x30x24T
- Depth of cut: 90'(85mm),45'(65mm)
Downloads: No
Warranty Details:
WARRANTY INFORMATION - WORCRAFT POWER TOOLS
Worcraft offers a standard 6 months warranty on all Worcraft Tools.
Warranty excludes:
• Repairs have been made or attempted by others.
• Repairs are required because of normal wear and tear.
• The tool has been abused, misused, or improperly maintained.
• Alterations have been made to the tool.
• This does not affect your statutory rights.
Note: Worcraft reserved the right to amend conditions of warranty without prior notice.
![WORCRAFT CMS-S20LI CORDLESS MITRE SAW 20V | 7-1/2" | 3600RPM [ CMSS20LI ] [ ONE FOR ALL ]](https://cthardware.com/pub/media/catalog/product/cache/ce17793cb484b7c346215568f79f07b4/c/t/ctweb_cmss20li_solo_1.jpg)