Makita Combo 2 TW005GD201 Impact Wrench 12.7 mm (1/2") + DF001GZ Driver Drill 13 mm (1/2") [ Raya Promotion XGT Combo ]
Combo Include:
- TW005GD201 12.7 mm (1/2") Impact Wrench
Include
2x 2.5Ah Battery (BL4025)
1x Fast Charger (DC40RA)
1x Makpac Connector Box (Type 2)
- DF001GZ 13 mm (1/2") Driver Drill [ Tool only ]
TW005GD201 Impact Wrench 12.7 mm (1/2")
Features:
- Electronic 4 stage impact power selection for added versatility
- 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
- Trigger switch with full speed mode allows for less hand and finger fatigue
- Constant speed control maintains fastening torque by minimizing the rotation speed reduction caused by decreased battery capacity
- Style of socket retention: Pin detent
- Reverse Rotation Auto Stop Mode stops after the bolt/nut loosened enough
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
Specification
- Fastening Capacities: Standard Bolt: M10 - M20 (3/8 - 3/4") | High Strength Bolt: M10 - M16 (3/8, 5/8") | Nut-Busting Torque 630 Nm (465 ft. lbs.) | 2,050 Nm (1,510 ft. lbs.) | Square Drive 12.7 mm (1/2") Pin Detent
- Impacts Per Minute (IPM): 0-4,000 | 0-3,400 | 0-2,600 | 0-1,800
- Max Fastening Torque: 350 Nm (260 ft. lbs.)
- No Load Speed (RPM): 0-3,200 | 0-2,600 | 0-1,800 | 0-1,000
- Dimensions (L x W x H): 144 x 86 x 248 mm (5-5/8 x 3-3/8 x 9-3/4")
- Net Weight: 1.9 - 2.2kg (4.2 - 4.9lbs.)
- Work Amount (approx.): 560 pcs with BL4025 x2 | Continuous tightening of M16 bolt
DF001GZ Driver Drill 13 mm (1/2")
Features
- Outstanding drilling speed; Delivers 20% or more higher speed than previous model
- Increased max speed (0-2,600 RPM) in High mode for faster drilling speed in light duty applications
- Variable 2-speed transmission (0-650 & 0-2,600 RPM) for a wide range of drilling and fastening applications
- Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
- Electronical clutch (41/21 settings in Low/High mode) allows for clutch setting in the torque range which cannot be covered
- XPT (e-Xtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh conditions
Specification
- Capacity Steel: 20 mm (13/16") | Wood (Auger-Bit): 50 mm (2") | Wood (Self-Feed Bit): 76 mm (3") | Wood (Hole Saw): 152 mm (6") | Siding Board: 220 mm (8-5/8")
- Chuck Capacity: 1.5 - 13 mm (1/16 - 1/2")
- Max Fastening Torque Hard: 140 Nm (1,240 in. lbs.) | Soft: 68 Nm (600 in. lbs.)
- Max Lock Torque: 125 Nm (1,100 in. lbs.)
- No Load Speed (RPM): High: 0 - 2,600 | Low: 0 - 650
- Dimensions (L x W x H): 181 x 86 x 275 mm (7-1/8" x 3-3/8" x 10-7/8")
- Net Weight: 2.7 - 3.0 kg (5.9 - 6.6 lbs.)
- Work Amount (approx.): 480 holes with BL4025 | Drilled 38 mm SPF with 7/8" auger bit (high speed)
Downloads: No
Warranty Details:
WARRANTY INFORMATION - MAKITA POWER TOOLS
Makita offers a standard 1-year warranty on all Makita Tools. except for heat gun (period of 6 months warranty)
Warranty excludes:
1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,)
2. Damage resulting from use of improper accessories, non-genuine replacement parts, disassembly, tampering, alteration, and repairing in any way that affects its performance.
3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse, and misuse in evidence caused by overloading the tool beyond its capacity.
4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual.
5. If the serial number on the tool, the seal on the battery and charger have been defaced or removed.
6. If the receipt or invoice that displays the date of purchase could not be present.
Note: Makita reserved the right to amend conditions of warranty without prior notice.