The AG08-180 Worcraft Angle Grinder is ideally suited for welders, shipyard workers, stonemasons, general contractors, and floor and tile installers. Suitable for a full range of grinding, cutting, sanding, rust removal, and restoration work.
Worcraft Electric Angle Grinder 180mm
The AG08-180 Worcraft Angle Grinder is ideally suited for welders, shipyard workers, stonemasons, general contractors, and floor and tile installers. Suitable for a full range of grinding, cutting, sanding, rust removal, and restoration work.
Fitted with a 1,600W powerful motor and 9" (180mm) diameter disc for maximum performance. The rear handle rotates 180 degrees to 3 preset positions to enable it to be positioned for different applications. The front handle can also be positioned left, center or right.
SPECIFICATIONS:
Voltage/Frequency | 110-240V/50-60Hz |
Rated power | 1600W |
Variable speed | No |
No-load speed | 8000rpm |
Spindle thread | M14 |
Soft-start function | Yes |
Max. diameter of cutting disc | 180mm |
Max. diameter of the rubber sanding plate | 180mm |
Max. diameter of circular wire brush | 75mm |
Max. diameter of cup wire brush | 75mm |
Downloads: No
Warranty Details:
WARRANTY INFORMATION - WORCRAFT POWER TOOLS
Worcraft offers a standard 6 months warranty on all Worcraft Tools.
Warranty excludes:
• Repairs have been made or attempted by others.
• Repairs are required because of normal wear and tear.
• The tool has been abused, misused, or improperly maintained.
• Alterations have been made to the tool.
• This does not affect your statutory rights.
Note: Worcraft reserved the right to amend conditions of warranty without prior notice.