WIM CO2 Welding MIG210S

 WIM CO2 Welding MIG210S

* Input Voltage : 220/240V
* Input Current : 33A
* Welding Current : 30 ~ 210A
* Duty Cycle : 30%
* Weight : 72Kg
* Dimensions (mm) : 450 x 850 x 720

Migweld 210S and 280S are designed after careful consideration to meet the requirements for the automotive body repairs and light production industry. Problems caused by “Burn Through” Common in the light gauge metal welding by the MIG process have been eradicated with the Migweld 210S and 280S. This is done through better circuitry in the PCB, good quality rectification components and effective wire feeder. Finally, careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings enable us to achieve a high output with maximum efficiency for this class of power sources.

Features:

- The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting.
- The MIGWELD 210 will have an internal or external wire feeder.
- The MIGWELD 210 has a 2-steps voltage selection. These MIGWELD`s welding characteristics are excellent. both in CO² and mixed gases.
- Better welding parameters 0.6mm - 1.6mm (Min 30 amps - Max 500 amps).
- Heavy duty chassis construction.
- Double thermal protection for transformer and rectifier.
- Ergonomic and value added features. (Tool container, torch holder and lower gas tray holder).