GRUNDFOS CMB5-37PT AUTOMATIC PRESSURE BOOSTER PUMP [ A-C-A-G-P-B ] 0.67KW | 1PH | 99953852 | 18L TANK | 97L/MIN [ CM537PT ]
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
We currently ship to Malaysia. International shipping is available by request only, please contact us for inquiry.
Standard shipping normally takes 3-5 days. Express shipping within Klang Valley is available for an additional charge, please contact us if you need it.
Returning an item
Returning an item
If you are not completely satisfied with your purchase, please contact our customer service team. Please note that not all items are returnable, check our return policy page for details.
CMB 5-37 A-C-A-G-P-B
The Grundfos CM Booster PT is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where small leakages are expected to occur. The booster system consists of a Grundfos CM pump, a pressure tank, and a pressure switch assembled into one unit. The system is supplied ready for use, with preset start pressure and corresponding tank precharge pressure. The pressure band is approximately 1 bar. The system is simple to install. When the system has been connected to the pipework, it is all a matter of inserting the plug into a power supply socket, and the system is operational.
Features:
• CM pump
• Pressure tank to minimize the number of pump starts
• Motor protection (single-phase only)
• Automatic operation.
The Grundfos CM Booster PT is mainly used for agricultural and light-commercial water supply and similar water installations where minor leakages can be expected.
NB:
• Suction lift: Max. 1 m, including suction-pipe pressure loss at a liquid temperature of +20 °C. (not self-priming)
LIQUID:
• Pumped liquid: Water
• Liquid temperature range: 0 .. 60 °C
• Selected liquid temperature: 20 °C
• Density: 998.2 kg/m³
TECHNICAL:
• Pump speed on which pump data are based: 2900 rpm
• Rated flow: 4.7 m³/h
• Rated head: 30.7 m
• Primary shaft sea: AVBE
• Approvals and markings: CE
• Return valve: YES
• Start pressure: 1-5 bar
MATERIALS:
• Pump housing: Cast iron | EN-JL1030 | ASTM 30 B
• Impeller: Stainless steel | DIN W.-Nr. 1.4301 | AISI 304
• Rubber: EPDM
INSTALLATION:
• t max amb: 60 °C
• Flange standard: WHITWORTH THREAD RP
• Pump inlet: Rp 1 1/4
ELECTRICAL DATA:
• Rated power - P2: 0.67 kW
• Mains frequency: 50 Hz
• Rated voltage: 1 x 220-240 V
• Maximum current consumption: 4.4-4.0 A
• Rated speed: 2720-2800 rpm
• Enclosure class (IEC 34-5): IP55
• Insulation class (IEC 85): F
• Type of cable plug: UK
• Mains cable: 2 m
TANK:
• Tank volume: 18 L
OTHERS:
• Net weight: 19.6 kg
• Gross weight: 29.7 kg
Payment & Security
Payment methods - iPay88

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.