Shopping Cart 0
MYR0.00

GRUNDFOS UNILIFT KP.250.M.1 SUBMERSIBLE WASTEWATER | DRAINAGE PUMPS 0.48KW | STAINLESS STEEL | 3.11l L/S | 7.5M [ 012H6300 | KP250M ]


In stock
SKU
13KP250M
MYR1,880.00

UNILIFT KP.250.M.1

No. 012H6300

Suitable for:

  • Commercial wastewater
  • Domestic wastewater
  • Industrial wastewater treatment & reuse


UNILIFT KP is a compact stainless-steel submersible pump designed for pumping non-aggressive water and grey water. It can be used as a portable unit or stationary installation inside and outside buildings.

UNILIFT KP.250.M.1

Submersible drainage pump

Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase canned motor in insulation class F with thermal overload protection.

The pump is fitted with a suction strainer, and a carrying handle and is supplied with a 10 m mains cable.

The impeller is a semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rainwater, and similar liquids.

The pump has a double shaft seal consisting of two lip seals with grease in-between.

The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid. The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid

The motor is filled with a non-toxic motor liquid.


LIQUID:

Liquid temperature range: 0 .. 50 °C
Density: 998.2 kg/m³


TECHNICAL:

Maximum flow: 3.11 l/s
Max. Particle: 10 mm
Approvals: CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,CHROHS,SEPRO


MATERIALS:

Pump housing: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304


INSTALLATION:

Range of ambient temperature: 0... 50 °C
Type of connection: Rp
Size of connection: 1 1/4 inch
Maximum installation depth: 7 m


ELECTRICAL DATA:

Power input - P1: 480 W
Mains frequency: 50 Hz
Rated voltage [V]: 1 x 220-230 V
Rated current: 2.3 A
Capacitor size - run: 8 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 m
Type of cable plug: NONE


OTHERS:

Environmental approvals: WEEE
Net weight: 7 kg
Gross weight: 7.3 kg

Downloads: No

Warranty Details:

WARRANTY INFORMATION - GRUNDFOS PUMP

TERMS AND CONDITIONS

 

E-warranty number WA XXXXXX & WD XXXXXX

1. Grundfos will grant either a 12 or 24 months warranty (depending on the product) on manufacturing defects commencing from the date of purchase.
2. The warranty only comes into force if the date of purchase is confirmed by proof of a tax invoice.
3. The additional 6 months warranty will only be awarded if the warranty is registered within 14 days from the date of purchase.
4. Within the warranty period, Grundfos shall carry out the repair or replacing of parts at Grundfos' option, ex-factory or ex-authorized Grundfos Service Centre, any product of Grundfos' manufacture.
5. Grundfos will not be liable for any costs of removal, installation, transportation, or any charges which arise in connection with this warranty claim.
6. Grundfos will not be liable for any replacement of parts caused by normal wear and tear, damage caused by dry running, cavitation, unsuitable operating condition, unfavorable electric supply, mishandling, flooding, lightning, unauthorized alteration or repair, misapplication, and product which is installed not in accordance to Grundfos printed installation and operating instructions.
7. To obtain a warranty claim, the defective product must be returned to the Grundfos Service Centre with freight prepaid warranty details/receipt supporting the claim must also be included.

 

E-warranty number WE XXXXXX

1. Grundfos will grant 36 months warranty for Grundfos CMBE range (warranty no. WEXXXXX) on manufacturing defects commencing from the date of purchase.
2. The warranty only comes into force with a valid warranty number and the date of purchase is confirmed by proof of a tax invoice.
3. 1 (ONE) Free Onsite Service (upon customers’ request) will be granted during the 36 months period excluding the replacement of spare parts (replacement of the parts will be chargeable if failure is not due to manufacturing defect), for customers who have registered their warranty online.
4. Within the warranty period, Grundfos shall carry out the repair or replacing of parts at Grundfos' option, ex-factory or ex-authorized Grundfos Service Centre, any product of Grundfos' manufacture.
5. Grundfos will not be liable for any costs of removal, installation, transportation, or any charges which arise in connection with this warranty claim.
6. Grundfos will not be liable for any replacement of parts caused by normal wear and tear, damage caused by dry running, cavitation, unsuitable operating condition, unfavorable electric supply, mishandling, flooding, lightning, unauthorized alteration or repair, misapplication and product which is installed not in accordance to Grundfos printed installation and operating instructions.
7. To obtain a warranty claim, the defective product must be returned to the Grundfos Service Centre with freight prepaid warranty details/receipt supporting the claim must also be included.