GRUNDFOS UNILIFT AP12.40.08.A1 SUBMERSIBLE WASTEWATER | DRAINAGE PUMPS 0.8 kW | STAINLESS STEEL | 5.9 A | 5.83 L/S | 15M [ 96404181 | 13AP124008A1 ]
UNILIFT AP12.40.08.A1
No. 96404181
Suitable for:
- Commercial wastewater
- Domestic wastewater
UNILIFT AP12 is a stainless-steel submersible pump designed for pumping non-aggressive water and grey wastewater with particles up to 12 mm. It can be used as a portable unit or stationary installation.
UNILIFT AP12.40.08.A1
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.
The pump is fitted with a suction strainer and level switch for automatic start and stop.
The impeller is a SEMI OPEN impeller for groundwater, surface water, rainwater, and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid, and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with a carrying handle and is supplied with a 10 m mains cable. The main cable is of the plug type with a glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
LIQUID:
Liquid temperature range: 0 .. 55 °C
Density: 998.2 kg/m³
TECHNICAL:
Maximum flow: 5.83 l/s
Type of impeller: SEMI OPEN
Max. Particle: 12 mm
Approvals: CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,CNROHSEXP,SEPRO
Rated speed: 2780 rpm
MATERIALS:
Pump housing: Stainless steel | EN 1.4301 | AISI 304
Impeller: Stainless steel | EN 1.4301 | AISI 304
Cable union: Brass | CW602N | C35330
INSTALLATION:
Range of ambient temperature: 0 .. 55 °C
Type of connection: Rp
Size of connection: 1 1/2 inch
Maximum installation depth: 7 m
ELECTRICAL DATA:
Power input P1: 1.3 kW
Motor type 1-phase: PSC
Rated power - P2: 0.8 kW
Mains frequency: 50 Hz
Rated voltage [V]: 1 x 230 V
Rated current: 5.9 A
Cos phi - power factor: 0.99
Rated speed: 2780 rpm
Capacitor size - run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 m
Type of cable plug: NONE
OTHERS:
Environmental approvals: WEEE
Net weight: 13.8 kg
Gross weight: 14.9 kg
Downloads: No
Warranty Details:
WARRANTY INFORMATION - GRUNDFOS PUMP
TERMS AND CONDITIONS
E-warranty number WA XXXXXX & WD XXXXXX
1. Grundfos will grant either a 12 or 24 months warranty (depending on the product) on manufacturing defects commencing from the date of purchase.
2. The warranty only comes into force if the date of purchase is confirmed by proof of a tax invoice.
3. The additional 6 months warranty will only be awarded if the warranty is registered within 14 days from the date of purchase.
4. Within the warranty period, Grundfos shall carry out the repair or replacing of parts at Grundfos' option, ex-factory or ex-authorized Grundfos Service Centre, any product of Grundfos' manufacture.
5. Grundfos will not be liable for any costs of removal, installation, transportation, or any charges which arise in connection with this warranty claim.
6. Grundfos will not be liable for any replacement of parts caused by normal wear and tear, damage caused by dry running, cavitation, unsuitable operating condition, unfavorable electric supply, mishandling, flooding, lightning, unauthorized alteration or repair, misapplication, and product which is installed not in accordance to Grundfos printed installation and operating instructions.
7. To obtain a warranty claim, the defective product must be returned to the Grundfos Service Centre with freight prepaid warranty details/receipt supporting the claim must also be included.
E-warranty number WE XXXXXX
1. Grundfos will grant 36 months warranty for Grundfos CMBE range (warranty no. WEXXXXX) on manufacturing defects commencing from the date of purchase.
2. The warranty only comes into force with a valid warranty number and the date of purchase is confirmed by proof of a tax invoice.
3. 1 (ONE) Free Onsite Service (upon customers’ request) will be granted during the 36 months period excluding the replacement of spare parts (replacement of the parts will be chargeable if failure is not due to manufacturing defect), for customers who have registered their warranty online.
4. Within the warranty period, Grundfos shall carry out the repair or replacing of parts at Grundfos' option, ex-factory or ex-authorized Grundfos Service Centre, any product of Grundfos' manufacture.
5. Grundfos will not be liable for any costs of removal, installation, transportation, or any charges which arise in connection with this warranty claim.
6. Grundfos will not be liable for any replacement of parts caused by normal wear and tear, damage caused by dry running, cavitation, unsuitable operating condition, unfavorable electric supply, mishandling, flooding, lightning, unauthorized alteration or repair, misapplication and product which is installed not in accordance to Grundfos printed installation and operating instructions.
7. To obtain a warranty claim, the defective product must be returned to the Grundfos Service Centre with freight prepaid warranty details/receipt supporting the claim must also be included.
